When portable battery jumper is known to all drivers, it becomes a must for them if their cars have been used for over one or two years. We always see people waiting on the road for tow truck or others for help, but we never get stuck with dying car battery if you have a pocket design mini battery jumper 18000mAh like this model EPower-103, which is applied with quick charge technology to save a lot of charging time, and Type C PD30W can connect macbook.
18000mAh jump starter with air compressor EPower-103 & EPower-119 can start up to all vehicles. It can restart 7.5L gasoline cars, 4.5L diesel vehicle, motocyles, mower, boats, and so on.
1. To keep G-18000 in good condition, please charge the Master unit shortly after using G-18000 to jump-start a vehicle or charge other electronic appliances.
2. In case of long-term storage , please charge G-18000 at least every 2 months
3. In order to ensure safety, reliability and quality, please do not disassemble G-18000. Any attempt to disassemble G-18000 will be a danger to yourself, your surrounding and will lead to invalidation of warranty directly.
4. Do not let the product come in contact with water or any other liquid.
5. Do not store this product in any of the following environments:
※Under direct sunlight
※Close to an air conditioning, electric heater or other heat sources
6. Do not use this product once finding the battery leaking , smelling or swelling.
1. Press the power switch and the power indicator shows as below
2. To ensure optimum situation of the battery, charge the Master unit as soon as possible after using this product to Jump-start vehicles or charge other electronic appliances.
3. Press the power switch and if the figure on LEDs is less than 10%, it means the power nearly run out. Please charge the host as soon as possible.
1. Insert a power plug of the 15V ! 1A USB wall charger into the socket. Insert the output DC plug of the adapter into the input charging port of the Master unit to charge it.
2. The percentage of power is displayed during the charging' period.Once 100% is displayed, the Master unit is fully charged.p>
3. Charging time: approximately 3~4 hours based on 15V/1A 2Å if the battery is completely exhausted.
4. Remove the power plug from the outlet once the battery is full charged.
1. Insert. the 12V car charging cable plug into the car's cigarette lighter socket. Insert the DC plug of the output end of the vehicle charging cable into the input charging port of the Master unit to charge it.
2. The display shows percentages one by one during charging. Once 100% is displayed, it means that the Master unit is fully charged.
Insert the USB plug of 1 to 1 USB cable provided with the product into the USB port of a desktop computer, which is turned on and, insert the micro U'SB plug into the micro USB input charging port of the Master unit to charge it.
......
1. Charge 5V mobile phones and, other electronic products from the USB 5V 2.4A output port of the Master unit.
2. Connect the charged unit to the Master unit and then press the power switch. The power indicator lights up to indicate that the charging unit is charged by the Master unit.
Press and hold the power switch for 3 seconds to activate the LED flashlight, then press once to change the lighting mode.4 modes: long flashlight, fast strobe,slow strobe and turn off the lights.
Output |
DC 5V/2.4A for USB1 port DC 5V/3.1A for USB2 port TYPE-C 5V/3.1A for TYPE-C port DC19V/3.5A for OUT DC port DC 12V for jump-start port(EC5) |
Input | DC 5V/2A for Micro port DC 15V/1A 2A for Input DC port |
Full charge time | 4~5 hours based on 5V/2A 3~4 hours based on 15V/1A 2A |
Capacity | 66.6Wh |
Weight | 530g |
Dimensions(L x W x H) | 172 x 82 x 38mm |
Starting Current | 450A |
Peak Current | 1000A |
Suitable for vehicle | 12V gasoline car/motorcycle under 6000 c.c./diesel car under 4500 c.c. |
Operating temperature | -20℃ ~ 60℃ |
Place of Origin | China |
We will do our best to make it happen since we don't shy away from challenges, so go ahead and just fill out this form.